Jual Hardness Tester PCE-2900 Tlp 0812-8222-998

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. An impactor bounces on the workpiece via a firing pin and the metal hardness is measured via the rebound. The PCE-2900 hardness meter is equipped with a backlit colour display.

Likewise, the buttons on the PCE-2900 are illuminated. Thus, the display can be read well even in low light conditions. The impact device is connected to the hardness tester via a cable. The hardness tester PCE-2900 has an internal memory of 6 x 100 measurement sets. The memory thus allows a documentation of the measured values. Via the integrated USB and WiFi interface, the measured values can be transferred from the hardness tester via software to a PC. The hardness tester is powered by commercially available 1.5V AA batteries and has a battery life of about 50 hours. 

Features:

USB and WiFi for data transmission 

Large, bright touch-screen LCD display

Large measuring range

Measurement possible in every position 

Hardness scales (HRC, HRB, HV, HB, HS) 

For all metallic materials

What's In The Box:

(1) Hardness Tester PCE-2900

(1) Impactor D

(1) Test block

(2) 1.5V AA batteries

(1) User manual

(1) Carry case

Related product you might see: